Ivoclar Te-Econom Plus Universal Shade A2
Te-Econom Plus is a light-curing, radiopaque hybrid composite designed for both anterior and posterior restorations. It offers outstanding physical properties and exceptional polishability, ensuring reliable performance and a natural aesthetic finish. Its high radiopacity allows for easy detection in X-rays, while the extended working time enables clinicians to perform procedures efficiently and with precision.
₹756.00
In stock
SKU
SBIVC08130
Price:
756.00
(Inclusive of Taxable Goods)
Ivoclar Te-Econom Plus Universal Shade A2 is available to buy in increments of 1
Contact us for sales assistance from our Biomedical Engineer.
Features:
- Superior physical properties
- Excellent polishability
- High radiopacity for clear X-ray identification
- Extended working time
- Backed by proven Ivoclar Vivadent technology and quality
Indications:
- Class I to V restorations
- Aesthetic restorations in anterior teeth
- Stress-bearing posterior restorations
Advantages:
- Superior physical durability
- Smooth and high-quality polish
- Easy X-ray visibility
- Long working time for better procedure control
- Trusted Ivoclar Vivadent technology and performance
| Technical Specification |
|
|---|
- 1 x 4gm syringe
- Select the shade. For facilitated access to the treatment field, the flexible and patient-friendly mouth opener OptraGate can be used.
- Establish sufficient isolation, preferably with a rubber dam (complete isolation is ensured with, for example, the anatomically shaped OptraDam Plus).
- Prepare the cavity according to the requirements of the adhesive technique.
- Clean the cavity with water spray.
- Air dry the cavity.
- Apply a pulp protector (calcium hydroxide) if needed; only cover areas close to the pulp and subsequently apply a pressureresistant cement (e.g. Vivaglass Liner).
- Place a matrix (e.g. the selectively thinned OptraMatrix) and an interdental wedge, if required.
- Apply Eco-Etch on the enamel and then on dentin and allow a reaction time of 30 seconds on enamel and 15 seconds on dentin. After that, thoroughly rinse with water spray and dry the tooth surfaces with oil-free compressed air. Avoid dehydrating the dentin.
- Apply a generous amount of Te-Econom Bond on enamel and dentin, using the enclosed applicator brush. Brush the material gently into the dentin for 10 s. Next, evaporate any remaining solvent with a slow stream of air. Lightcure the adhesive according to the curing time recommendations below. Ensure complete coverage of the preparation surface.
- Apply Te-Econom Flow in layers of a max. of 2 mm and light cure according to the curing recommendations below. Apply Te-Econom Plus in layers of max. 2 mm and adapt/contour the material with a suitable instrument (e.g. OptraSculpt). The OptraContact instrument can be used to selectively position high-quality proximal contacts.
- Polymerize each layer individually according to the table below. Hold the light emission window as closely as possible to the surface of the restorative material.
- Finish the restoration with suitable finishers or fine diamonds. Subsequently, check the occlusion. Polish with silicone polishers (e.g. OptraPol Next Generation).
