Kalabhai Ultra Rock Die (Brown) Stone (3kg)
Kalabhai ultrarock die stone That produces a homogenous coating on the die stone and plaster attributed to its viscosity.This ultrarock die stone protects models against abrasion specifically at the marginal area which is most prone to breakage. The film does not disassociate from the die while building a wax pattern due to heating. it is a rapid setting and thereby reduces working time. Thus, it is the perfect choice for the users. This is long lasting and a quality product that serves for a very long time.
₹771.75
In stock
SKU
SBKA07080
Price:
735.00
(Inclusive of 5% GST)
Kalabhai Ultra Rock Die (Brown) Stone (3kg) is available to buy in increments of 1
Contact us for sales assistance from our Biomedical Engineer.
- Homogenous Coating: Provides a smooth, even application on die stone and plaster.
- Abrasion Resistance: Protects models against wear and tear, especially at marginal areas.
- Heat Stability: Film remains intact during wax pattern building, even under heat.
- Rapid Setting: Quick setting time reduces overall working time.
- High Durability: Long-lasting performance, ensuring models stay intact over extended use.
- Optimal Viscosity: Ensures easy mixing and application without air bubbles.
- Professional Aesthetic: Brown color offers a polished, professional look to finished models.
| Technical Specification |
|
|---|
- 1 x Ultra Rock Die 3kg
Preparation:
- Ensure all mixing tools and surfaces are clean and dry before starting.
- Measure the required amount of water and die stone powder. The recommended water-to-powder ratio is essential for optimal results.
Mixing:
- Pour the measured water into a clean mixing bowl.
- Gradually add the Kalabhai Ultra Rock Die Stone powder to the water.
- Mix thoroughly for 30-60 seconds using a mechanical mixer or manually until a smooth, homogenous mixture is achieved. Avoid air bubbles.
Pouring:
- Carefully pour the mixed die stone into the mold or impression.
- Use gentle vibration to eliminate any trapped air bubbles and ensure complete coverage.
Setting:
- Allow the die stone to set. Initial setting time is rapid, typically within a few minutes.
- Wait for at least 30 minutes to ensure full hardness before removing the model from the mold.
Finishing:
- Trim and finish the model as required.
- The model is now ready for further processing, such as wax pattern building. The coating remains stable and does not disassociate under heat.
Storage:
- Store the unused Kalabhai Ultra Rock Die Stone powder in a dry, cool place.
- Keep the container tightly sealed to prevent moisture absorption.
Safety Precautions:
- Wear protective gloves and a mask to avoid inhaling dust.
- Work in a well-ventilated area.
- Avoid contact with eyes and prolonged skin exposure
